Shop Online
Two post lift Forward model i10
• Low-profile design allows the lift arm to easily fit under the vehicle. Large rubber base supports the chassis or water line. There are 3.5-inch, and 5-inch lift height adapters to accommodate a variety of vehicle applications.
• The Spot-Rite lift’s front arm design features a three-stage stroke to allow for both symmetrical and asymmetrical vehicle lifts. It allows the vehicle to be positioned in front or behind the lift pole to avoid bumps while opening the door.
• Can support a maximum weight of 4.5 tons. Can be used with personal cars, pickup trucks, and vans.
• Direct-Pulling lifting system. The hydraulic cylinder is mounted on top. When the lift is raised, the shaft retracts into the cylinder housing. To achieve maximum performance while carrying weight and reduce maintenance costs
• The safety switch beam cuts off work when the forklift is raised above a certain height.
• Spring automatically locks lift arm position when raised. and unlocks itself when lowered to the ground
• System for unlocking both poles from a single point.
• Passed usability testing by “ETL” institute and supported by “ALI” institute.
Specifications :
| Maximum weight lifted | 10,000 lbs. |
| Total lift distance: 5″ Extensions | 76-1/4″ |
| high | 143″ (3,632 mm.) |
| wide | 131″ or optional 137″ (3,327 mm. / 4,380 mm.) |
| Drive Through Clearance | 99″ or optional 105″ (2,515 mm. / 2,667 mm.) |
| Limit Switch Height | 137-5/8″ (3,496 mm.) |
| Front arm stroke distance (Min/Max) | 23″ / 44-1/2″ (584mm / 1,130 mm.) |
| Rear arm stroke length (Min/Max) | 36″ / 58″ (914 mm. / 1,473 mm.) |
| Adapter height(Min/Max) | 3-3/4″ (95mm) no adapter extension 8-3/4″ (222mm) w/5″ adapter extension |
| Width (in pole) | 109″ or optional 115″ |
| Minimum ceiling height | 12′ |
| Electrical power | 208-230V, 17 amps |
| Motor size | 1PH / 2HP / 60Hz |
| Minimum ceiling height | 144″ (3,658 mm.) |
